The official report lists the following findings. The wording is quoted from CDC, grouped by the area of the ship so it is easier to read. We do not change the inspector's wording.
Drinking water (3 findings)
Item 08
Where it was found: Potable Water-Chill Lines - Ice Machines
Official finding: The following ice machine chill lines were not identified with either ISO 14726 (blue/white/blue) or by another uniquely identifiable method to prevent cross-connections:
Deck 2
Main Galley
Deck 6
Grill Restaurant Pantry
Deck 7
Open-Air Bar Pantry
Official recommendation
Identify all refrigerant brine lines and nonpotable chilled water lines in all food areas, such as on ice machines, ice cream machines, etc., with either ISO 14726 (blue/white/blue) or by another uniquely identifiable method to prevent cross-connections.
Item 06
Where it was found: Potable Water-Legionella Testing Records
Official finding: There was no record of Legionella testing of any of the seven potable water storage tanks nor the hot water return line.
Official recommendation
Sample the potable water system for Legionella at least every 6 months. Ensure sample sites are representative of the potable water and RWF systems and number of samples depends on the size and complexity of the vessel.
The Legionella sampling plan must include a selection of the following locations: (1) Potable water storage tanks; (2) Water heaters and hot water storage; (3) Hot water return lines; (4) Representative points of use in cabins, galleys, and recreational areas. Include a mix of fixture types (showers, sink faucets, tubs). Include potable water samples when temperatures are in the range favorable for Legionella growth (77°–113°F, 25°–45°C)
Item 44
Where it was found: Potable Water-Legionella Testing
Official finding: Management was not aware of the need to include potable water storage tanks and hot water return lines in the Legionella sampling plan to ensure that the sampling plan is representative of the potable water system.
Official recommendation
Ensure the supervisor or person responsible for potable water operations on the vessel demonstrates to VSP, on request during inspections, knowledge of potable water operations, is able to demonstrate this knowledge by compliance with Section 5 of the VSP Environmental Public Health Standards or by responding correctly to the inspector's questions as they relate to the specific operation, and ensures employees are properly trained to comply with Section 5 of the VSP Environmental Public Health Standards as it relates to their assigned duties.
Galleys and dining rooms (16 findings)
Item 36
Where it was found: Food Service General-Lighting Intensity
Official finding: The following food areas did not have adequate light intensity measurements:
Deck 2
Main Galley
The light intensity behind the front-loading warewashing machine measured less than 220 lux. The deckhead light fixture was out of order.
Deck 1
Crew Mess
The light intensity on the sides and back of the counter-mounted coffee machine measured less than 110 lux. Additionally, the light intensity at the dispensing nozzle measured less than 220 lux.
Deck 1
Beverage Walk-In Cold Room #10
The light intensity along the back left food storage rack measured less than 110 lux. One of the bulbs was in disrepair.
Official recommendation
Ensure the light intensity is at least 220 lux (20 foot-candles) on food preparation surfaces.
Ensure the light intensity is at least 220 lux (20 foot-candles) as measured 750 millimeters (30 inches) above the deck in food preparation areas, handwashing facilities, warewashing areas, equipment and utensil storage, pantries, toilet rooms, and consumer self-service areas. Ensure the light intensity is at least 110 lux (10 foot-candles) at 750 millimeters (30 inches) above the deck in walk-in refrigerator units, dry storage areas, linen storage, waiter stations, scrapping stations, and handwashing stations in bars.
Ensure the light intensity is at least 110 lux (10 foot-candles) behind and around mounted equipment, including counter-mounted equipment.
Item 20
Where it was found: Food Service General-Conditions of Food-Contact Surfaces
Official finding: The following food-contact surfaces were not adequately designed, constructed, or properly maintained.
Deck 2
Main Galley
The evaporator deflector panel had four slotted fasteners on the food splash zone. Additionally, the ice scoop hook holder welded to the ice bin had crevices throughout making it difficult to clean.
Deck 2
Main Galley
A previously cleaned and sanitized blue cutting board was excessively scored and peeling making it difficult to clean.
Deck 3
Main Lounge Bar Pantry
The ice scoop hook holder welded to the ice machine bin had crevices throughout making it difficult to clean.
Deck 6
Grill Restaurant Pantry
The ice scoop hook holder welded to the ice machine bin had crevices throughout making it difficult to clean.
Deck 7
Open-Air Bar Pantry
The ice scoop hook holder welded to the ice machine bin had crevices throughout making it difficult to clean.
Official recommendation
Design and construct food-contact surfaces of equipment and utensils to be durable and to retain their characteristic qualities under normal use conditions. Ensure multiuse food-contact surfaces are: (1) Smooth; (2) Free of breaks, open seams greater than 0.8 mm (1/32 inch), cracks, chips, inclusions, pits, and similar imperfections; (3) Free of sharp internal angles, corners, and crevices; (4) Finished to have smooth welds and joints; (5) Accessible for cleaning and inspection by one of the following methods: without being disassembled, by disassembling without the use of tools, or by easy disassembling with the use of handheld tools commonly available to maintenance and cleaning personnel.
Item 24
Where it was found: Galley-Deck 2 - Warewashing
Official finding: The chlorine in the sanitizing bucket measured 25 ppm. This was corrected immediately.
Official recommendation
Ensure sanitizing solutions are used with the following concentrations: (1) A chlorine solution with a concentration between 50 mg/L (ppm) and 200 mg/L (ppm).
Item 22
Where it was found: Galley-Deck 2 - Pasty/Bakery
Official finding: The chlorine solution in the sanitizing bucket was cloudy. This was corrected immediately.
Official recommendation
Ensure the wash, rinse, and sanitize solutions are kept clean.
Item 15
Where it was found: Galley-Deck 2 - Dry Storage Pantry
Official finding: Two dented cans of beans were stored inside the dry storage pantry. This was corrected immediately.
Official recommendation
Ensure food is safe and unadulterated. Ensure food packages are in good condition and protect the integrity of the contents, so the food is not exposed to adulteration or potential contaminants. Ensure canned goods with dents on end or side seams are not used.
Item 27
Where it was found: Galley-Deck 2 - Warewashing
Official finding: The clean storage rack adjacent to the warewashing area was soiled with rice and other food debris on the bottom two shelves.
Official recommendation
Ensure nonfood-contact surfaces of equipment are kept free of an accumulation of dust, dirt, food residue, and other debris.
Item 28
Where it was found: Galley-Deck 2 - Warewashing
Official finding: The clean storage rack adjacent to the warewashing area was soiled with rice and other food debris on the bottom two shelves. Additionally, two previously cleaned and sanitized cake pans stored on the clean storage rack were soiled on the food-contact surface.
Official recommendation
Store cleaned equipment and utensils, laundered linens, and single-service articles and single-use articles: (1) In a clean, dry location.
Item 26
Where it was found: Galley-Deck 2 - Warewashing
Official finding: Two previously cleaned and sanitized cake pans stored on the clean storage rack were soiled on the food-contact surface.
Official recommendation
Ensure food-contact surfaces of equipment and utensils are clean to sight and touch.
Item 33
Where it was found: Food Service General-Conditions of Decks/Bulkheads/Deckheads
Official finding: The following food areas had one or more of these conditions: decks, bulkheads, or deckheads in disrepair; soiled surfaces; or missing coving:
Deck 3
Main Lounge Bar
The open bottle shelving did not have coving throughout the bulkhead junctures.
Deck 2
Crew Bar
Multiple beer cans and bottle caps along with more than a day's accumulation of dust were on a wood pallet underneath the refrigerator.
Deck 2
Main Galley
Excessive accumulation of condensate above the left combination oven. Dripping onto the food equipment was not observed.
Deck 2
Main Galley
Excessive accumulation of more than a day's grease residue and dust throughout the ventilation hood, in particular, the supply cover above the combination ovens.
Deck 2
Main Galley Bain Marie Line
The ventilation exhaust over the food equipment had more than a day's accumulation of grease and dust.
Deck 2
Main Galley
The deckhead light fixture adjacent to the hot production handwashing station was excessively soiled with grease and black like residue between the fixture and deckhead juncture.
Deck 2
Main Galley Warewashing
The deck grouting along the scupper drain adjacent to the three compartment sink was recessed.
Deck 2
Main Galley Warewashing
A large amount of soiled food equipment was stored on the deck across the three compartment sink.
Deck 1
Crew Mess Warewashing
A large square open bulkhead penetration was underneath the handwashing station.
Official recommendation
Cove all bulkhead/deck, equipment/deck, cabinet/deck, counter/bulkhead/backsplash, and deck sink coaming/deck junctures in galleys, pantries, buffets, bars, waiter stations, dining room work counters, provisions, scrapping stations, food storage rooms, food transportation corridors, equipment or utensil storage rooms, and toilet rooms intended for use by food employees. Ensure decks, bulkheads, deckheads, and attached equipment in food preparation, warewashing, pantries, and storage areas are cleaned as often as necessary. Ensure decks, bulkheads, and deckheads in food preparation, warewashing, pantries, bars, and food and equipment storage areas are constructed and maintained for easy cleaning.
Item 18
Where it was found: Galley-Deck 2 - Walk-In Refrigerator
Official finding: A pan of uncooked sausage was stored above a pan of uncooked fish. This was corrected immediately.
Official recommendation
Protect food from cross-contamination or other sources of contamination by the following methods: (1) Physically separating raw animal food during storage, preparation, holding, and display from raw ready-to-eat food so products do not physically touch and so that one product does not drip into another; (2) Physically separating ready-to-eat food from other ready-to-eat food that include raw or undercooked animal products, including meat and fish, so that products do not physically touch and so that one food cannot drip into another; (3) Separating types of raw animal food such as beef, fish, lamb, pork, and poultry from each other—except when combined as ingredients—during storage, preparation, holding, and display by using separate equipment for each type, or by arranging each type of food in equipment so that cross-contamination of one type with another is prevented, or by preparing each type of food at different times or in separate areas; (4) Cleaning and sanitizing equipment and utensils; (5) Storing the food in packages, covered containers, or wrappings; (6) Cleaning visible soil on hermetically sealed containers of food before opening; (7) Protecting food containers that are received packaged together in a case or overwrap from cuts when the case or overwrap is opened; (8) Separating damaged, spoiled, or recalled food being held on the vessel; (9) Separating unwashed fruits and vegetables from ready-to-eat food.
Item 22
Where it was found: Galley-Deck 2 - Warewashing
Official finding: The three-compartment sink was not being operated properly to clean and sanitize food equipment. Soiled pots and pans exceeded the capacity of the designated soiled-equipment storage areas, resulting in soiled equipment stored directly on the deck along the bulkhead adjacent to the sinks.
During warewashing, the wash and rinse compartments were empty. Crew attributed this condition to a malfunctioning drain component and stated that a work order had been submitted approximately two weeks earlier.
A crew member was observed cleaning soiled food equipment with a sponge over the empty rinse compartment and using the pre-rinse spray hose to remove detergent and food debris. The equipment was then submerged in the high-temperature sanitizing compartment, which was visibly soiled with food debris and soap. The inspector measured a sanitizing water temperature of 147°F using a tip-sensitive thermometer.
The three-compartment sink was not equipped with a temperature-measuring device.
Additionally, liquid food waste from the soiled-equipment drop-off area/drainboard was observed flowing along the back of the sinks, past the faucets, and toward the sanitizing compartment. At the time of the inspection, the liquid waste was not observed to affect the rinse or sanitizing compartments.
Official recommendation
Provide a maximum registering temperature-measuring device to verify the temperature in the warewashing machines and the three-compartment sink. If hot water is used for sanitization in manual warewashing operations, ensure the sanitizing compartment of the sink is designed with an integral heating device capable of maintaining water at a temperature not less than 77°C (171°F). Provide a maximum registering temperature-measuring device to verify the temperature in the sink. Ensure drainboards, utensils, racks, or tables large enough to accommodate all soiled and cleaned items that may accumulate during hours of operation are provided for utensil holding before cleaning and after sanitizing. Maintain warewashing equipment in good repair and proper adjustment, including: (1) Warewashing equipment is maintained in a state of repair and condition that meets the standards of the materials, design, and construction. Ensure the wash, rinse, and sanitize solutions are kept clean.
Item 23
Where it was found: Galley-Deck 2 - Warewashing
Official finding: The three-compartment sink was not being operated properly to clean and sanitize food equipment. Soiled pots and pans exceeded the capacity of the designated soiled-equipment storage areas, resulting in soiled equipment stored directly on the deck along the bulkhead adjacent to the sinks.
During warewashing, the wash and rinse compartments were empty. Crew attributed this condition to a malfunctioning drain component and stated that a work order had been submitted approximately two weeks earlier.
A crew member was observed cleaning soiled food equipment with a sponge over the empty rinse compartment and using the pre-rinse spray hose to remove detergent and food debris. The equipment was then submerged in the high-temperature sanitizing compartment, which was visibly soiled with food debris and soap. The inspector measured a sanitizing water temperature of 147°F using a tip-sensitive thermometer.
The three-compartment sink was not equipped with a temperature-measuring device.
Additionally, liquid food waste from the soiled-equipment drop-off area/drainboard was observed flowing along the back of the sinks, past the faucets, and toward the sanitizing compartment. At the time of the inspection, the liquid waste was not observed to affect the rinse or sanitizing compartments.
Official recommendation
If necessary for effective cleaning, ensure equipment and utensils are preflushed, presoaked, or scrubbed with abrasives. Ensure food-contact surfaces of equipment and utensils are effectively washed to remove or completely loosen soils by using whatever manual or mechanical means is necessary. Ensure washed equipment and utensils are rinsed so that abrasives are removed and cleaning chemicals are removed or diluted with water by using one of the following procedures: (1) Use of a distinct, separate water rinse after washing and before sanitizing if using a three-compartment sink, alternative manual warewashing equipment equivalent to a three-compartment sink, or a three-step washing, rinsing, and sanitizing procedure in a warewashing system for CIP equipment; (2) Use of a nondistinct water rinse integrated in the application of the sanitizing solution and wasted immediately after each application if using a warewashing machine that does not recycle the sanitizing solution or if using alternative manual warewashing equipment such as sprayers; (3) Use of a nondistinct water rinse integrated in the application of the sanitizing solution if using a warewashing machine that recycles the sanitizing solution for use in the next wash cycle.
Item 24
Where it was found: Galley-Deck 2 - Warewashing
Official finding: The three-compartment sink was not being operated properly to clean and sanitize food equipment. Soiled pots and pans exceeded the capacity of the designated soiled-equipment storage areas, resulting in soiled equipment stored directly on the deck along the bulkhead adjacent to the sinks.
During warewashing, the wash and rinse compartments were empty. Crew attributed this condition to a malfunctioning drain component and stated that a work order had been submitted approximately two weeks earlier.
A crew member was observed cleaning soiled food equipment with a sponge over the empty rinse compartment and using the pre-rinse spray hose to remove detergent and food debris. The equipment was then submerged in the high-temperature sanitizing compartment, which was visibly soiled with food debris and soap. The inspector measured a sanitizing water temperature of 147°F using a tip-sensitive thermometer.
The three-compartment sink was not equipped with a temperature-measuring device.
Additionally, liquid food waste from the soiled-equipment drop-off area/drainboard was observed flowing along the back of the sinks, past the faucets, and toward the sanitizing compartment. At the time of the inspection, the liquid waste was not observed to affect the rinse or sanitizing compartments.
Official recommendation
Sanitize food-contact surfaces of equipment and utensils. In a manual operation, if immersion in hot water is used for sanitizing, ensure: (1) The temperature of the water is maintained at 77°C (171°F) or above and (2) The food-contact surface is immersed for at least 30 seconds.
Item 13
Where it was found: Galley-Deck 2 - Warewashing
Official finding: The three-compartment sink was not being operated properly to clean and sanitize food equipment. Soiled pots and pans exceeded the capacity of the designated soiled-equipment storage areas, resulting in soiled equipment stored directly on the deck along the bulkhead adjacent to the sinks.
During warewashing, the wash and rinse compartments were empty. Crew attributed this condition to a malfunctioning drain component and stated that a work order had been submitted approximately two weeks earlier.
A crew member was observed cleaning soiled food equipment with a sponge over the empty rinse compartment and using the pre-rinse spray hose to remove detergent and food debris. The equipment was then submerged in the high-temperature sanitizing compartment, which was visibly soiled with food debris and soap. The inspector measured a sanitizing water temperature of 147°F using a tip-sensitive thermometer.
The three-compartment sink was not equipped with a temperature-measuring device.
Additionally, liquid food waste from the soiled-equipment drop-off area/drainboard was observed flowing along the back of the sinks, past the faucets, and toward the sanitizing compartment. At the time of the inspection, the liquid waste was not observed to affect the rinse or sanitizing compartments.
Official recommendation
Ensure the supervisor or person in charge of food operations on the vessel monitors that: (1) Employees are properly sanitizing cleaned multiuse equipment and utensils before they are reused. Because of the risks for foodborne illness inherent to the food operation, ensure the supervisor or person in charge of food operations on the vessel demonstrates to VSP, on request during inspections, knowledge of foodborne disease prevention, application of the Hazard Analysis Critical Control Point principles, and food safety standards. Ensure that the person in charge demonstrates this knowledge: (1) By compliance with these standards; (2) By responding correctly to the inspector's questions as they relate to the specific food operation. Ensure the areas of knowledge include: (1) Describing the relation between prevention of foodborne illness and management and control of the following: cross-contamination, hand contact with ready-to-eat foods, handwashing, and maintaining food operations in a clean condition and in good repair; (2) Explaining the relation between food safety and providing equipment that is sufficient in number and capacity as well as properly designed, constructed, located, installed, operated, maintained, and cleaned; (3) Explaining correct procedures for cleaning and sanitizing utensils and food-contact surfaces of equipment.
Item 24
Where it was found: Galley-Deck 1 - Crew Mess Warewashing
Official finding: The chlorine solution in the sanitizing bucket measured 25 ppm. This was corrected immediately.
Official recommendation
Ensure sanitizing solutions are used with the following concentrations: (1) A chlorine solution with a concentration between 50 mg/L (ppm) and 200 mg/L (ppm).
Item 17
Where it was found: Buffet-Deck 2 - Crew Mess - Beverage Station
Official finding: The counter-mounted coffee machine was listed as a time control unit for milk dispensing, but upon further review, the machine did not have a milk dispenser. Crew stated the plan must have been associated with the previous counter-mounted coffee machine.
Official recommendation
Maintain a written time control plan that ensures compliance with these standards on the vessel and make it available for review during inspections. Ensure a time control plan is posted and available to all crew working at each outlet where time control is used. Ensure plan(s): (1) Include set-up and discard times for each outlet. Include all services and events where TCS/PHF is kept on time control. If used, ensure colored labels correspond to the discard times stated in the plan; (2) List all units (to include refrigeration and hot holding units, preparation counters, cabinets, compartments, and equipment) on time control. Cabinets and compartments on time control must be physically labeled; (3) Describe or show the flow of TCS/PHF from when last in temperature control to placement in time control and discard.
Housekeeping (2 findings)
Item 41
Where it was found: Housekeeping-Cabin Cleaning Records
Official finding: On 11 October 2026, a crew member ill with acute gastroenteritis (AGE) refused cabin cleaning. Cabin cleaning was performed on 10 and 12 October 2026.
Official recommendation
Ensure cabins that house passengers or crew with AGE are cleaned and disinfected daily while the occupants are ill.
Item 41
Where it was found: Housekeeping-Chemical Locker
Official finding: Concentration test strips were not available for the primary disinfectant solution listed in the Outbreak Prevention Response Plan (OPRP). It has been two months since switching to the current onboard disinfectant product that requires dilution. There were no alternative methods to verify disinfectant concentration when cleaning and disinfecting during normal operations, acute gastroenteritis (AGE) cabin cleaning, and during an outbreak.
Official recommendation
Ensure disinfectant products or systems (for example, on-site hypochlorous acid generators) are effective against human norovirus or an acceptable surrogate (for example, calicivirus) and used according to the manufacturer's instructions (such as concentration, contact time, and approved surfaces). Clean surfaces thoroughly prior to disinfection.
Medical center (1 finding)
Item 01
Where it was found: Medical-24-Hour Report
Official finding: The total number of passengers and crew submitted on the 24-hour report did not match the manifest from day of embarkation. Manifest for day of embarkation listed 170 passengers and 141 crew, while the 24-hour report listed 176 passengers (6 embarked mid-voyage) and 140 crew (1 disembarked mid-voyage).
Official recommendation
Ensure the AGE report contains the following: (1) Name of the vessel; (2) Port of embarkation; (3) Date of embarkation; (4) Port of disembarkation; (5) Date of disembarkation; (6) Total number of reportable AGE cases among passengers, including those who have disembarked because of illness—even if the number is 0 (zero reporting); (7) Total number of reportable AGE cases among crew members, including those who have disembarked because of illness—even if the number is 0 (zero reporting); and (8) Total number of passengers and crew members on the cruise.
Other inspection items (2 findings)
Item 17
Where it was found: Bar-Deck 3 - Main Lounge
Official finding: The time control identifying label was placed inside of the counter-mounted coffee machine milk storage compartment.
Official recommendation
Maintain a written time control plan that ensures compliance with these standards on the vessel and make it available for review during inspections. Ensure a time control plan is posted and available to all crew working at each outlet where time control is used. Ensure plan(s): (1) Include set-up and discard times for each outlet. Include all services and events where TCS/PHF is kept on time control. If used, ensure colored labels correspond to the discard times stated in the plan; (2) List all units (to include refrigeration and hot holding units, preparation counters, cabinets, compartments, and equipment) on time control. Cabinets and compartments on time control must be physically labeled; (3) Describe or show the flow of TCS/PHF from when last in temperature control to placement in time control and discard.
Item 17
Where it was found: Bar-Deck 6 - Observatory Lounge
Official finding: The time control identifying label was placed inside of the counter-mounted coffee machine milk storage compartment.
Official recommendation
Maintain a written time control plan that ensures compliance with these standards on the vessel and make it available for review during inspections. Ensure a time control plan is posted and available to all crew working at each outlet where time control is used. Ensure plan(s): (1) Include set-up and discard times for each outlet. Include all services and events where TCS/PHF is kept on time control. If used, ensure colored labels correspond to the discard times stated in the plan; (2) List all units (to include refrigeration and hot holding units, preparation counters, cabinets, compartments, and equipment) on time control. Cabinets and compartments on time control must be physically labeled; (3) Describe or show the flow of TCS/PHF from when last in temperature control to placement in time control and discard.
Pest and insect management (3 findings)
Item 39
Where it was found: Food Service General-Integrated Pest Management (IPM) - Flies
Official finding: Flies were in the following food areas:
Deck 6
Observatory Lounge Bar
One fly was inside the technical space beneath the handwashing station.
Deck 2
Main Galley
One fly was by clean storage rack.
Deck 2
Main Galley
One fly was over the pastry food preparation countertop.
Deck 1
Crew Mess Warewashing
One fly was by the soil drop-off area.
Deck 1
Officer Mess
Two flies were inside the undercounter refrigerator technical space.
Official recommendation
Effectively control the presence of insects, rodents, and other pests to minimize their presence in food areas.
Item 40
Where it was found: Integrated Pest Management-IPM
Official finding: Certified Pesticide Applicator certification for the only applicator onboard was not available for review. Crew stated he did not have documentation readily available.
Official recommendation
Ensure the IPM plan, monitoring records, and other documentation are available for review during inspections. Document the training of the pest-control personnel.
Item 40
Where it was found: Integrated Pest Management-IPM - Rat Guards
Official finding: Rat guards were not placed upon inspector's initial boarding of the vessel. The vessel arrived into port at 0730. Rat guards were observed placed by at least 0840.
Official recommendation
Ensure rat guards are on all lines that go ashore on arrival and until 1 hour before the ship leaves port. Ensure each line has at least one rat guard placed either as far as practicable from the pier or as far as practicable from the ship but still close enough to stuff any openings with nonchewable material. Ensure rat guards are not staggered on adjacent lines, and a group of lines do not merge onto one rat guard.
Gastrointestinal outbreak notices
No official CDC outbreak notice in the listings we collected is clearly matched to this ship. That is not a guarantee that no illness occurred; it only means none of the posted notices we have were matched here. See the outbreak list.
Source: CDC Vessel Sanitation Program. This page does not change the substantive content of official scores or findings.